Siemens SIMATIC ET 200SP Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 33 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Maximum amount of I/O data

The maximum amount of I/O data is 32 bytes input/output data.

Accessories

The following accessories must be ordered separately:

● Labeling strips

● Reference identification label

A detailed list of the available accessories can be found in the system manual ET 200SP

distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).

Server module

The server module (V1.1.1 and higher) is included in the scope of delivery of the interface

module and also available separately as an accessory. The server module has the following

properties:

● Terminates the backplane bus of the ET 200SP distributed I/O system

● Features a support for 3 spare fuses (5 × 20 mm)

● Identification data I&M 0 to 3

● Retentive storage of the device name for device replacement without topological

configuration

Note

You need to configure and assign parameters to the server module in the configuration

software.

To do this, place the server module in the last configuration slot and enable the parameter

Group diagnostics: No supply voltage L+. If there are 12 I/O modules, the server module is

plugged in slot 13.

You can find more information in the Server module

(http://support.automation.siemens.com/WW/view/en/63257531) manual.

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

Manual, 03/2015, A5E34934425-AA

Product overview

2.1 Properties