Siemens SIMATIC NET Panduan Instalasi - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri Siemens SIMATIC NET. Siemens SIMATIC NET 40 halaman. Network components bus terminal
Juga untuk Siemens SIMATIC NET: Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Manual Petunjuk Perakitan (6 halaman), Informasi Produk (6 halaman), Panduan Instalasi (50 halaman), Panduan Instalasi (40 halaman), Panduan Referensi (14 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (48 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

RUGGEDCOM RS8000T

Installation Manual, 01/2021, C79000-G8976-1023-05

Connect the positive wire from the power source to the positive/hot (+/L)

terminal on the terminal block.

Positive/Hot (+/L) Terminal

Negative/Neutral (-/N) Terminal

Surge Ground Terminal

Braided Ground Cable

Figure 2.8

Terminal Block Wiring

Connect the negative wire from the power source to the negative/neutral (-/N)

on the terminal block.

Using a braided wire or other appropriate grounding wire, connect the surge

ground terminal to the chassis ground connection. The surge ground terminal

is used as the ground conductor for all surge and transient suppression circuitry

internal to the unit.

Using a #6 ring lug and #6-32 screw, secure the ground terminal on the power

source to the chassis ground terminal on the device. Make sure the lug is

tightened to 1.7 N·m (15 lbf·in).

Stainless Steel Stud

#6-32 Screw

#6 Ring Lug

Figure 2.9

Chassis Ground Connection

Installing the Device

2.3.2 Connecting DC Power