Siemens SIMATIC NET Manual de instalación - Página 24

Navegue en línea o descargue pdf Manual de instalación para Equipamiento industrial Siemens SIMATIC NET. Siemens SIMATIC NET 40 páginas. Network components bus terminal
También para Siemens SIMATIC NET: Manual de instrucciones (29 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones de montaje (6 páginas), Información sobre el producto (6 páginas), Manual de instalación (50 páginas), Manual de instalación (40 páginas), Manual de referencia (14 páginas), Manual de instalación (34 páginas), Manual de instalación (48 páginas), Manual de instrucciones (32 páginas)

RUGGEDCOM RS8000T

Installation Manual, 01/2021, C79000-G8976-1023-05

Connect the positive wire from the power source to the positive/hot (+/L)

terminal on the terminal block.

Positive/Hot (+/L) Terminal

Negative/Neutral (-/N) Terminal

Surge Ground Terminal

Braided Ground Cable

Figure 2.8

Terminal Block Wiring

Connect the negative wire from the power source to the negative/neutral (-/N)

on the terminal block.

Using a braided wire or other appropriate grounding wire, connect the surge

ground terminal to the chassis ground connection. The surge ground terminal

is used as the ground conductor for all surge and transient suppression circuitry

internal to the unit.

Using a #6 ring lug and #6-32 screw, secure the ground terminal on the power

source to the chassis ground terminal on the device. Make sure the lug is

tightened to 1.7 N·m (15 lbf·in).

Stainless Steel Stud

#6-32 Screw

#6 Ring Lug

Figure 2.9

Chassis Ground Connection

Installing the Device

2.3.2 Connecting DC Power