Siemens SIMATIC NET Panduan Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri Siemens SIMATIC NET. Siemens SIMATIC NET 48 halaman. Network components bus terminal
Juga untuk Siemens SIMATIC NET: Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Manual Petunjuk Perakitan (6 halaman), Informasi Produk (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (50 halaman), Panduan Instalasi (40 halaman), Panduan Referensi (14 halaman), Panduan Instalasi (34 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

Installing the Device

2.5.1 Connecting AC or DC Power

Connect the positive wire from the power source to the positive/live (+/L)

terminal on the terminal block.

Screw-Type Terminal Block

Pluggable Terminal Block

Jumper

Positive/Live (+/L) Terminal

Negative/Neutral (-/N) Terminal (-/N)

Surge Ground Terminal

Chassis Ground Terminal

Chassis Ground Connection

Figure 2.4

Terminal Block Wiring

Connect the negative wire from the power source to the negative/neutral (-/N)

terminal on the terminal block.

Install the supplied metal jumper between terminals 2, 4 and 6 to connect

the surge ground terminals to the chassis ground terminal. The surge ground

terminals are used as the ground conductor for all surge and transient

suppression circuitry internal to the unit.

Installation Manual, 04/2022, C79000-G8976-1342-09

RUGGEDCOM M2100F