Siemens SIMATIC NET Panduan Instalasi - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri Siemens SIMATIC NET. Siemens SIMATIC NET 48 halaman. Network components bus terminal
Juga untuk Siemens SIMATIC NET: Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Manual Petunjuk Perakitan (6 halaman), Informasi Produk (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (50 halaman), Panduan Instalasi (40 halaman), Panduan Referensi (14 halaman), Panduan Instalasi (34 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

2.5.2

Wiring Examples

The following illustrate how to connect power to single and dual power supplies.

RUGGEDCOM M2100F

Installation Manual, 04/2022, C79000-G8976-1342-09

Using a #6 ring lug and #6-32 screw, secure the ground terminal on the power

source to the chassis ground connection on the device. Make sure the lug is

tightened to 1.7 N·m (15 lbf·in).

Stainless Steel Stud

#6-32 Screw

#6 Ring Lug

Figure 2.5

Chassis Ground Connection

DANGER

Electrocution hazard – risk of death, serious personal injury and/or damage

to the device

Make sure the supplied terminal block cover is always installed before the

device is powered.

Install the terminal block cover.

Installing the Device

2.5.2 Wiring Examples