Siemens SIMATIC NET APE1402 Panduan Konfigurasi - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Peralatan Industri Siemens SIMATIC NET APE1402. Siemens SIMATIC NET APE1402 36 halaman. Application processing engine
Halaman Cetak
To disable alternative boot options, do the following:
1.
2.
3.
4.
5.
6.
2.8
Setting the BIOS Bootloader Password
The BIOS bootloader can be configured to authenticate users before the BIOS is
loaded.
NOTICE
If the BIOS bootloader password is lost, the module must be returned to Siemens for
service. For more information, contact Siemens Customer Support.
This service is not supported by warranty.
To set the BIOS bootloader password, do the following:
Note
Only supervisor-level users are permitted to change the BIOS bootloader password.
NOTICE
Use strong passwords. Avoid weak passwords such as password1, 123456789,
abcdefgh, etc.
1.
2.
3.
4.
5.
6.
RUGGEDCOM APE (Application Processing Engine)
Configuration Manual, 12/2019, C79000-G8976-1121-05
Power on the RUGGEDCOM APE.
Press F2 to access the BIOS.
Enter the supervisor or user password to access the BIOS.
Select Boot .
Note
An exclamation mark (!) appears next to boot options that are disabled.
For each boot option to disable, highlight the option and press SHIFT+1 .
Press F10 to save and reboot.
Power on the RUGGEDCOM APE.
Press F2 to access the BIOS.
Enter the supervisor password to access the BIOS.
Select Security .
Set Authenticate to Boot to Enabled.
Press F10 to save and reboot.
Configuring and Using the RUGGEDCOM APE
2.8 Setting the BIOS Bootloader Password
15