- ページ 24

産業機器 Siemens SIMATIC NET APE1402のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SIMATIC NET APE1402 36 ページ。 Application processing engine

To disable alternative boot options, do the following:

2.8

Setting the BIOS Bootloader Password

The BIOS bootloader can be configured to authenticate users before the BIOS is

loaded.

NOTICE

If the BIOS bootloader password is lost, the module must be returned to Siemens for

service. For more information, contact Siemens Customer Support.

This service is not supported by warranty.

To set the BIOS bootloader password, do the following:

Note

Only supervisor-level users are permitted to change the BIOS bootloader password.

NOTICE

Use strong passwords. Avoid weak passwords such as password1, 123456789,

abcdefgh, etc.

RUGGEDCOM APE (Application Processing Engine)

Configuration Manual, 12/2019, C79000-G8976-1121-05

Power on the RUGGEDCOM APE.

Press F2 to access the BIOS.

Enter the supervisor or user password to access the BIOS.

Select Boot .

Note

An exclamation mark (!) appears next to boot options that are disabled.

For each boot option to disable, highlight the option and press SHIFT+1 .

Press F10 to save and reboot.

Power on the RUGGEDCOM APE.

Press F2 to access the BIOS.

Enter the supervisor password to access the BIOS.

Select Security .

Set Authenticate to Boot to Enabled.

Press F10 to save and reboot.

Configuring and Using the RUGGEDCOM APE

2.8 Setting the BIOS Bootloader Password