Siemens Simatic S7-1500 Panduan Pengguna - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 45 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Wiring

3.1 Pin assignment

PROFINET interface X1 with 2-port switch (X1 P1 R and X1 P2 R)

The assignment corresponds to the Ethernet standard for an RJ45 plug.

● When autonegotiation is deactivated, the RJ45 socket is allocated as a switch (MDI-X).

● When autonegotiation is activated, autocrossing is in effect and the RJ45 socket is

allocated either as data terminal equipment (MDI) or a switch (MDI-X).

Figure 3-2

Reference

You can find additional information on the topics of "Connecting the CPU" and

"Accessories/spare parts" in the S7-1500, ET 200MP

(http://support.automation.siemens.com/WW/view/en/59191792) system manual.

The CPU 1511T-1 PN has a PROFINET interface with two ports. The PROFINET interface

itself has a MAC address, and each of the two PROFINET ports has its own MAC address.

The CPU 1511T-1 PN therefore has three MAC addresses in total.

The MAC addresses of the PROFINET ports are needed for the LLDP protocol, for example

for the neighborhood discovery function.

The number range of the MAC addresses is sequential. The first and last MAC address are

lasered on the rating plate on the right side of each CPU 1511T-1 PN.

CPU 1511T-1 PN (6ES7511-1TK01-0AB0)

Manual, 09/2016, A5E36270833-AA