Siemens Simatic S7-1500 Manual - Halaman 32

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 50 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (39 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Siemens Simatic S7-1500 Manual
Parameters/address space
4.2 Address space
Set output DQ - behavior of the STS_DQ bit
The following section shows the behavior of the STS_DQ bit with the parameter assignment
"Set output DQ = between comparison value and high counting limit".
The STS_DQ bit is set to 1
when the comparison value < = counted value <= high counting limit is reached.
As an option, a hardware interrupt can be enabled in the parameter assignment. This is
generated with the parameter rising edge of the STS_DQ bit.
The following figure shows an example of the behavior of the STS_DQ bit between the
comparison value and high counting limit.
Figure 4-11
The following section shows the behavior of the STS_DQ bit with the parameter assignment
"Set output DQ = between low counting limit and comparison value".
The STS_DQ bit is set to 1
when the low counting limit < = counted value < = comparison value is reached.
As an option, a hardware interrupt can be enabled in the parameter assignment. This is
generated with the parameter rising edge of the STS_DQ bit.
32
Behavior of the STS_DQ bit and hardware interrupt
DI 32x24VDC HF digital input module (6ES7521-1BL00-0AB0)
Manual, 09/2016, A5E03485935-AF