Siemens Simatic S7-1500 Handmatig - Pagina 32

Blader online of download pdf Handmatig voor {categorie_naam} Siemens Simatic S7-1500. Siemens Simatic S7-1500 50 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens Simatic S7-1500: Handmatig (40 pagina's), Handmatig (37 pagina's), Handmatig (47 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (45 pagina's), Handmatig (27 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (47 pagina's), Handmatig (43 pagina's), Handmatig (48 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (41 pagina's), Handmatig (50 pagina's), Handmatig (40 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Communicatiehandleiding (36 pagina's), Handmatig (40 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Toepassing Beschrijving (50 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (41 pagina's), Handmatig (46 pagina's), Handmatig (38 pagina's), Handmatig (35 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Handmatig (35 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (50 pagina's), Uitrustingshandleiding (32 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (29 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Pagina afdrukken
Siemens Simatic S7-1500 Handmatig
Parameters/address space
4.2 Address space
Set output DQ - behavior of the STS_DQ bit
The following section shows the behavior of the STS_DQ bit with the parameter assignment
"Set output DQ = between comparison value and high counting limit".
The STS_DQ bit is set to 1
when the comparison value < = counted value <= high counting limit is reached.
As an option, a hardware interrupt can be enabled in the parameter assignment. This is
generated with the parameter rising edge of the STS_DQ bit.
The following figure shows an example of the behavior of the STS_DQ bit between the
comparison value and high counting limit.
Figure 4-11
The following section shows the behavior of the STS_DQ bit with the parameter assignment
"Set output DQ = between low counting limit and comparison value".
The STS_DQ bit is set to 1
when the low counting limit < = counted value < = comparison value is reached.
As an option, a hardware interrupt can be enabled in the parameter assignment. This is
generated with the parameter rising edge of the STS_DQ bit.
32
Behavior of the STS_DQ bit and hardware interrupt
DI 32x24VDC HF digital input module (6ES7521-1BL00-0AB0)
Manual, 09/2016, A5E03485935-AF