Siemens Simatic S7-1500 Manual - Halaman 21

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens Simatic S7-1500. Siemens Simatic S7-1500 39 halaman. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Juga untuk Siemens Simatic S7-1500: Manual (40 halaman), Manual (37 halaman), Manual (47 halaman), Manual (24 halaman), Manual (34 halaman), Panduan Pengguna (45 halaman), Manual (27 halaman), Panduan Konfigurasi (20 halaman), Manual (47 halaman), Manual (43 halaman), Manual (48 halaman), Manual (26 halaman), Manual (28 halaman), Manual (50 halaman), Manual (34 halaman), Panduan Pengguna (44 halaman), Manual (50 halaman), Manual (30 halaman), Manual (41 halaman), Manual (50 halaman), Manual (40 halaman), Manual Pemrograman Keselamatan (48 halaman), Panduan Instruksi Komunikasi (36 halaman), Manual (40 halaman), Manual (25 halaman), Manual (42 halaman), Deskripsi Aplikasi (50 halaman), Manual (28 halaman), Manual (33 halaman), Manual (49 halaman), Manual (36 halaman), Manual (41 halaman), Manual (46 halaman), Manual (38 halaman), Manual (35 halaman), Manual (28 halaman), Manual (35 halaman), Panduan Peralatan (35 halaman), Manual (50 halaman), Panduan Peralatan (32 halaman), Panduan Peralatan (38 halaman), Manual (29 halaman), Panduan Peralatan (38 halaman), Manual (34 halaman), Manual (36 halaman), Panduan Peralatan (50 halaman), Manual (45 halaman)

Port Qualifier Information

This parameter releases the Port Qualifier Information (PQI).

The PQI provides information on the port status and the IO-Link device status.

Port configuration without S7-PCT

This parameter enables the port configuration without S7-PCT for the module.

Operating mode

This parameter determines the mode in which you operate the selected port.

You can select from the following options:

• IO-Link Autostart

• IO-Link Manual

• DI

• Deactivated

The setting of the port is granular and you can combine the operating modes as you like.

IO-Link Autostart

The connected IO-Link device starts automatically (Plug&Play functionality). The IO-Link

device is immediately available to you and operational.

IO-Link Manual

If the Vendor ID and Device ID match the connected device, the connected IO-Link device is

automatically started. In other words, in contrast to "IO-Link Autostart", the system checks

here whether the correct device is connected. You need to configure the Device ID / Vendor

ID to enable this.

You need to store the Vendor ID and Device ID of the connected IO-Link device in STEP 7.

In addition, you can select the inspection level for data storage:

• Identical type (V1.0) without Backup&Restore

• Type-compatible (V1.1) without Backup&Restore

• Type-compatible (V1.1) with Backup&Restore

• Type-compatible (V1.1) with Restore

You can find instructions for determining the Vendor ID and Device ID on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109748852).

The port operates as standard digital input.

Deactivated

The port is deactivated.

Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)

Equipment Manual, 08/2022, A5E45488510-AB

Parameters / address space

4.2 Declaration of parameters