Siemens Simatic S7-1500 매뉴얼 - 페이지 21

{카테고리_이름} Siemens Simatic S7-1500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-1500 39 페이지. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens Simatic S7-1500에 대해서도 마찬가지입니다: 매뉴얼 (40 페이지), 매뉴얼 (37 페이지), 매뉴얼 (47 페이지), 매뉴얼 (24 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (45 페이지), 매뉴얼 (27 페이지), 구성 매뉴얼 (20 페이지), 매뉴얼 (47 페이지), 매뉴얼 (43 페이지), 매뉴얼 (48 페이지), 매뉴얼 (26 페이지), 매뉴얼 (28 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (44 페이지), 매뉴얼 (50 페이지), 매뉴얼 (30 페이지), 매뉴얼 (41 페이지), 매뉴얼 (50 페이지), 매뉴얼 (40 페이지), 안전 프로그래밍 매뉴얼 (48 페이지), 통신 사용 설명서 (36 페이지), 매뉴얼 (40 페이지), 매뉴얼 (25 페이지), 매뉴얼 (42 페이지), 애플리케이션 설명 (50 페이지), 매뉴얼 (28 페이지), 매뉴얼 (33 페이지), 매뉴얼 (49 페이지), 매뉴얼 (36 페이지), 매뉴얼 (41 페이지), 매뉴얼 (46 페이지), 매뉴얼 (38 페이지), 매뉴얼 (35 페이지), 매뉴얼 (28 페이지), 매뉴얼 (35 페이지), 장비 매뉴얼 (35 페이지), 매뉴얼 (50 페이지), 장비 매뉴얼 (32 페이지), 장비 매뉴얼 (38 페이지), 매뉴얼 (29 페이지), 장비 매뉴얼 (38 페이지), 매뉴얼 (34 페이지), 매뉴얼 (36 페이지), 장비 매뉴얼 (50 페이지), 매뉴얼 (45 페이지)

Siemens Simatic S7-1500 매뉴얼
Port Qualifier Information
This parameter releases the Port Qualifier Information (PQI).
The PQI provides information on the port status and the IO-Link device status.
Port configuration without S7-PCT
This parameter enables the port configuration without S7-PCT for the module.
Operating mode
This parameter determines the mode in which you operate the selected port.
You can select from the following options:
• IO-Link Autostart
• IO-Link Manual
• DI
• Deactivated
The setting of the port is granular and you can combine the operating modes as you like.
IO-Link Autostart
The connected IO-Link device starts automatically (Plug&Play functionality). The IO-Link
device is immediately available to you and operational.
IO-Link Manual
If the Vendor ID and Device ID match the connected device, the connected IO-Link device is
automatically started. In other words, in contrast to "IO-Link Autostart", the system checks
here whether the correct device is connected. You need to configure the Device ID / Vendor
ID to enable this.
You need to store the Vendor ID and Device ID of the connected IO-Link device in STEP 7.
In addition, you can select the inspection level for data storage:
• Identical type (V1.0) without Backup&Restore
• Type-compatible (V1.1) without Backup&Restore
• Type-compatible (V1.1) with Backup&Restore
• Type-compatible (V1.1) with Restore
You can find instructions for determining the Vendor ID and Device ID on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109748852).
DI
The port operates as standard digital input.
Deactivated
The port is deactivated.
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Equipment Manual, 08/2022, A5E45488510-AB
Parameters / address space
4.2 Declaration of parameters
21