Siemens Simatic S7-1500 매뉴얼 - 페이지 20

{카테고리_이름} Siemens Simatic S7-1500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-1500 39 페이지. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens Simatic S7-1500에 대해서도 마찬가지입니다: 매뉴얼 (40 페이지), 매뉴얼 (37 페이지), 매뉴얼 (47 페이지), 매뉴얼 (24 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (45 페이지), 매뉴얼 (27 페이지), 구성 매뉴얼 (20 페이지), 매뉴얼 (47 페이지), 매뉴얼 (43 페이지), 매뉴얼 (48 페이지), 매뉴얼 (26 페이지), 매뉴얼 (28 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (44 페이지), 매뉴얼 (50 페이지), 매뉴얼 (30 페이지), 매뉴얼 (41 페이지), 매뉴얼 (50 페이지), 매뉴얼 (40 페이지), 안전 프로그래밍 매뉴얼 (48 페이지), 통신 사용 설명서 (36 페이지), 매뉴얼 (40 페이지), 매뉴얼 (25 페이지), 매뉴얼 (42 페이지), 애플리케이션 설명 (50 페이지), 매뉴얼 (28 페이지), 매뉴얼 (33 페이지), 매뉴얼 (49 페이지), 매뉴얼 (36 페이지), 매뉴얼 (41 페이지), 매뉴얼 (46 페이지), 매뉴얼 (38 페이지), 매뉴얼 (35 페이지), 매뉴얼 (28 페이지), 매뉴얼 (35 페이지), 장비 매뉴얼 (35 페이지), 매뉴얼 (50 페이지), 장비 매뉴얼 (32 페이지), 장비 매뉴얼 (38 페이지), 매뉴얼 (29 페이지), 장비 매뉴얼 (38 페이지), 매뉴얼 (34 페이지), 매뉴얼 (36 페이지), 장비 매뉴얼 (50 페이지), 매뉴얼 (45 페이지)

Siemens Simatic S7-1500 매뉴얼
Parameters / address space

4.2 Declaration of parameters

Parameters
Vendor ID***
Device ID***
Inspection Level/Data Stor­
age***
* If PQI is activated, 1 byte less space remains for input data of the device. For example: GSD setting 16
bytes = 15 bytes + PQI
** Make sure not to exceed the maximum possible length of the input or output data for all ports.
*** Only effective if you use the "IO-Link Manual" port mode.
Maximum possible length of the input or output data
Example:
You have selected the configuration 64 I / 64 Q.
You have assigned 4 bytes of input data to the first port.
For the remaining ports, you can assign a total of 60 bytes of input data.
Reference
You can find additional information on the Vendor ID and Device ID on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109748852).
4.2
Declaration of parameters
Diagnostics: No supply voltage L+
Enabling the diagnostic alarm for missing or insufficient supply voltage L+.
Diagnostics: Port
This parameter allows the enabling of the diagnostics for the selected port.
The possible diagnostics are dependent on the IO-Link device used. Additional information
about the diagnostic interrupts can be found in the description of the utilized IO-Link device.
20
Value range
Manufacturer ID of the connected
IO-Link device
Device ID of the connected IO-Link
device
Identical type (V1.0) without
Backup&Restore
Type-compatible (V1.1) without
Backup&Restore
Type-compatible (V1.1) with
Backup&Restore
Type-compatible (V1.1) with
Restore
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Default
0
0
Type-compatible (V1.1) with
Backup&Restore
Equipment Manual, 08/2022, A5E45488510-AB