- ページ 20

産業機器 Siemens Simatic S7-1500のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Siemens Simatic S7-1500 39 ページ。 Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens Simatic S7-1500 にも: マニュアル (40 ページ), マニュアル (37 ページ), マニュアル (47 ページ), マニュアル (24 ページ), マニュアル (34 ページ), ユーザーマニュアル (45 ページ), マニュアル (27 ページ), 設定マニュアル (20 ページ), マニュアル (47 ページ), マニュアル (43 ページ), マニュアル (48 ページ), マニュアル (26 ページ), マニュアル (28 ページ), マニュアル (50 ページ), マニュアル (34 ページ), ユーザーマニュアル (44 ページ), マニュアル (50 ページ), マニュアル (30 ページ), マニュアル (41 ページ), マニュアル (50 ページ), マニュアル (40 ページ), セーフティ・プログラミング (48 ページ), 通信取扱説明書 (36 ページ), マニュアル (40 ページ), マニュアル (25 ページ), マニュアル (42 ページ), アプリケーション概要 (50 ページ), マニュアル (28 ページ), マニュアル (33 ページ), マニュアル (49 ページ), マニュアル (36 ページ), マニュアル (41 ページ), マニュアル (46 ページ), マニュアル (38 ページ), マニュアル (35 ページ), マニュアル (28 ページ), マニュアル (35 ページ), 設備マニュアル (35 ページ), マニュアル (50 ページ), 設備マニュアル (32 ページ), 設備マニュアル (38 ページ), マニュアル (29 ページ), 設備マニュアル (38 ページ), マニュアル (34 ページ), マニュアル (36 ページ), 設備マニュアル (50 ページ), マニュアル (45 ページ)

Siemens Simatic S7-1500 マニュアル
Parameters / address space

4.2 Declaration of parameters

Parameters
Vendor ID***
Device ID***
Inspection Level/Data Stor­
age***
* If PQI is activated, 1 byte less space remains for input data of the device. For example: GSD setting 16
bytes = 15 bytes + PQI
** Make sure not to exceed the maximum possible length of the input or output data for all ports.
*** Only effective if you use the "IO-Link Manual" port mode.
Maximum possible length of the input or output data
Example:
You have selected the configuration 64 I / 64 Q.
You have assigned 4 bytes of input data to the first port.
For the remaining ports, you can assign a total of 60 bytes of input data.
Reference
You can find additional information on the Vendor ID and Device ID on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109748852).
4.2
Declaration of parameters
Diagnostics: No supply voltage L+
Enabling the diagnostic alarm for missing or insufficient supply voltage L+.
Diagnostics: Port
This parameter allows the enabling of the diagnostics for the selected port.
The possible diagnostics are dependent on the IO-Link device used. Additional information
about the diagnostic interrupts can be found in the description of the utilized IO-Link device.
20
Value range
Manufacturer ID of the connected
IO-Link device
Device ID of the connected IO-Link
device
Identical type (V1.0) without
Backup&Restore
Type-compatible (V1.1) without
Backup&Restore
Type-compatible (V1.1) with
Backup&Restore
Type-compatible (V1.1) with
Restore
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Default
0
0
Type-compatible (V1.1) with
Backup&Restore
Equipment Manual, 08/2022, A5E45488510-AB