Siemens Simatic S7-300 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens Simatic S7-300. Siemens Simatic S7-300 34 halaman. Automation systems, controlling a physical axis
Juga untuk Siemens Simatic S7-300: Manual (21 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian (5 halaman), Manual (35 halaman), Memulai (8 halaman), Memulai (16 halaman), Deskripsi Aplikasi (24 halaman), Manual (18 halaman), Manual (32 halaman), Manual Instalasi dan Perangkat Keras (20 halaman), Memulai (32 halaman)

The setting of ETH Adapter CN serial port parameters is omitted here, you can see the previous

description.

Set ETH Adapter CN working mode as TCP Server, port No. = 27011, waiting for clients to

connect.

Run the VCOMM virtual serial port software on the PC, set the simulated virtual serial port on the

PC. Select VCOMM as Client mode, initiatively to connect the server-side equipment. Choose the

device detector to create the virtual serial port.

Add a virtual serial port, the remote server IP address = ETH Adapter CN IP address, remote

server monitoring port = ETH Adapter CN port.

- 18 -