Siemens Simatic S7-300 Panduan Pengguna - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens Simatic S7-300. Siemens Simatic S7-300 34 halaman. Automation systems, controlling a physical axis
Juga untuk Siemens Simatic S7-300: Manual (21 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian (5 halaman), Manual (35 halaman), Memulai (8 halaman), Memulai (16 halaman), Deskripsi Aplikasi (24 halaman), Manual (18 halaman), Manual (32 halaman), Manual Instalasi dan Perangkat Keras (20 halaman), Memulai (32 halaman)

Set PC as server, ETH Adapter CN as client,let adapter take the initiative to connect the PC.

Set the ETH Adapter CN network parameters, the gateway of ETH Adapter CN,PC and router

must be same, the DNS server needn't to be setted because you don't use the dynamic domain

name on the Internet.

The setting of ETH Adapter CN serial port parameters is omitted here, you can see the

previous description.

Set ETH Adapter CN as TCP Client,remote host IP=PC IP address,host port=VCOMM software

port No..That's to say,the ETH Adapter CN will take the initiative to connect the server VCOMM

with IP=192.168.1.108,port No.=8000.

- 20 -