Siemens Simatic S7-300 Panduan Pengguna - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens Simatic S7-300. Siemens Simatic S7-300 34 halaman. Automation systems, controlling a physical axis
Juga untuk Siemens Simatic S7-300: Manual (21 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian (5 halaman), Manual (35 halaman), Memulai (8 halaman), Memulai (16 halaman), Deskripsi Aplikasi (24 halaman), Manual (18 halaman), Manual (32 halaman), Manual Instalasi dan Perangkat Keras (20 halaman), Memulai (32 halaman)

Run the VCOMM virtual serial port software on the PC, set the simulated virtual serial port on the

PC. Select VCOMM as Server mode, wait for the client to connect. Choose the device detector to

create the virtual serial port.

Add a new virtual serial port, the monitoring IP address = PC IP address, client mode device try to

connect the port = VCOMM software port, this is 8000.

Click OK and exit the software and re-run VCOMM, server side VCOMM will accept the client side

ETH Adapter CN connection. A new serial port COM3 will appear on the PC after the connection

is established. And this serial port will also appear in the Windows System Device Manager, then

you can choose this serial port in your applications,like STEP7.

- 21 -