Siemens Simatic S7-300 Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Siemens Simatic S7-300. Siemens Simatic S7-300 34 pagina's. Automation systems, controlling a physical axis
Ook voor Siemens Simatic S7-300: Handmatig (21 pagina's), Gebruiksaanwijzing (4 pagina's), Gebruiksaanwijzing (5 pagina's), Handmatig (35 pagina's), Aan de slag (8 pagina's), Aan de slag (16 pagina's), Toepassing Beschrijving (24 pagina's), Handmatig (18 pagina's), Handmatig (32 pagina's), Installatie- en hardwarehandleiding (20 pagina's), Aan de slag (32 pagina's)

Set PC as server, ETH Adapter CN as client,let adapter take the initiative to connect the PC.

Set the ETH Adapter CN network parameters, the gateway of ETH Adapter CN,PC and router

must be same, the DNS server needn't to be setted because you don't use the dynamic domain

name on the Internet.

The setting of ETH Adapter CN serial port parameters is omitted here, you can see the

previous description.

Set ETH Adapter CN as TCP Client,remote host IP=PC IP address,host port=VCOMM software

port No..That's to say,the ETH Adapter CN will take the initiative to connect the server VCOMM

with IP=192.168.1.108,port No.=8000.

- 20 -