Siemens SINAMICS G120 Panduan Petunjuk Pengoperasian - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SINAMICS G120. Siemens SINAMICS G120 32 halaman. Using blocksize converters in marine applications
Juga untuk Siemens SINAMICS G120: Memulai (46 halaman), Memulai (30 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Petunjuk Pemasangan dan Panduan Pemilik (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Pengoperasian yang Ringkas (32 halaman), Manual (42 halaman), Memulai (50 halaman), Panduan Perangkat (34 halaman), Panduan Pemasangan Cepat (2 halaman), Deskripsi Aplikasi (50 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Manual (31 halaman), Manual Aplikasi (34 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman)

Commissioning

4.1 Commissioning with STARTER or Startdrive

4.1

Commissioning with STARTER or Startdrive

Creating a new project

Procedure

To create a new project, proceed as follows:

1. In the menu, select "Project" → "New...".

2. Specify a name of your choice for the project.

You have created a new project.

Integrating the inverter into the project

Procedure

Proceed as follows to transfer an inverter connected via USB to your project:

1. Switch on the inverter supply voltage.

2. First insert a USB cable into your PC and then into the inverter.

3. The PC operating system installs the USB driver when you are connecting the inverter

and PC together for the first time.

– Windows 7 installs the driver automatically.

– For Windows XP you must acknowledge several system messages.

4. Start the commissioning software.

5. Press the "Accessible nodes" button.

Image 4-1

Image 4-2

"Accessible nodes" in STARTER

"Accessible nodes" in Startdrive

Compact Operating Instructions, 01/2016, A5E37058195B AA

CU250S-2 Control Units