Siemens SINAMICS G120 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS G120. Siemens SINAMICS G120 42 halaman. Using blocksize converters in marine applications
Juga untuk Siemens SINAMICS G120: Memulai (46 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Memulai (30 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Petunjuk Pemasangan dan Panduan Pemilik (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Pengoperasian yang Ringkas (32 halaman), Memulai (50 halaman), Panduan Perangkat (34 halaman), Panduan Pemasangan Cepat (2 halaman), Deskripsi Aplikasi (50 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Manual (31 halaman), Manual Aplikasi (34 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman)

3 Programming Overview

Programming Overview

3.1

There are two main ways to configure a SINAMICS G drive to communicate over

EtherNet/IP. The approach described in this note uses Add On Instructions with a

Generic Ethernet Module. This approach requires version 19 or higher for RSLogix

5000.

Alternatively, the drive can be set up for ODVA type configuration. This allows the

user to import a ODVA G120 EDS file to use the drive as an ODVA AC drive

object. This approach requires version 20 or higher for RSLogix 5000. A newer

option is an EDS file that works with Telegram 352 and setting P8990 to 0

(SINAMICS). This EDS path is discussed in a separate application note.

https://support.industry.siemens.com/cs/ww/en/view/109761721

Refer to the diagram below for a general overview of the steps to configure

depending on method.

Figure 3-1

SINAMICS G: Control of a G120 with an Allen-Bradley controller

(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP

Entry-ID: 82843076,

V4.0,

09/2018