Siemens SINAMICS G120 Manual - Page 7

Browse online or download pdf Manual for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 42 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page
Siemens SINAMICS G120 Manual

3 Programming Overview

Programming Overview
3
3.1

Configuration Choices

There are two main ways to configure a SINAMICS G drive to communicate over
EtherNet/IP. The approach described in this note uses Add On Instructions with a
Generic Ethernet Module. This approach requires version 19 or higher for RSLogix
5000.
Alternatively, the drive can be set up for ODVA type configuration. This allows the
user to import a ODVA G120 EDS file to use the drive as an ODVA AC drive
object. This approach requires version 20 or higher for RSLogix 5000. A newer
option is an EDS file that works with Telegram 352 and setting P8990 to 0
(SINAMICS). This EDS path is discussed in a separate application note.
https://support.industry.siemens.com/cs/ww/en/view/109761721
Refer to the diagram below for a general overview of the steps to configure
depending on method.
Figure 3-1
SINAMICS G: Control of a G120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 82843076,
V4.0,
09/2018
7