Siemens SINAMICS G120 Memulai - Halaman 31

Jelajahi secara online atau unduh pdf Memulai untuk Peralatan Industri Siemens SINAMICS G120. Siemens SINAMICS G120 50 halaman. Using blocksize converters in marine applications
Juga untuk Siemens SINAMICS G120: Memulai (46 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Memulai (30 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Petunjuk Pemasangan dan Panduan Pemilik (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Pengoperasian yang Ringkas (32 halaman), Manual (42 halaman), Panduan Perangkat (34 halaman), Panduan Pemasangan Cepat (2 halaman), Deskripsi Aplikasi (50 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Manual (31 halaman), Manual Aplikasi (34 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman), Petunjuk Pengoperasian yang Ringkas (2 halaman)

Halaman Cetak
Siemens SINAMICS G120 Memulai
Default setting 17: Two-wire control
with method 2
All Control Units
Selected with
STARTER: 2-wire
•
(forward/backward 1)
BOP-2: 2-wIrE 1
•
The CU 240B-2 does not have terminals 16 and 17
Default setting 20: Three-wire control
with method 2
All Control Units
Selected with
STARTER: 3-wire
•
(enable/on/reverse)
BOP-2: 3-wIrE 2
•
Fieldbus interface is not active.
The CU 240B-2 does not have
terminals 16 and 17
The default settings for BT inverters are also described in the operating instructions. See
also: Manuals for your inverter (Page 47).
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB
Default setting 18: Two-wire control
with method 3
Selected with
STARTER: 2-wire
•
(forward/backward 2)
BOP-2: 2-wIrE 2
•
Fieldbus interface is not active.
Default setting 21: Fieldbus USS
Selected with
STARTER: USS fieldbus
•
BOP-2: FB USS
•
USS setting: 38400 baud, 2 PZD, PKW
variable
The CU 240B-2 does not have
terminals 16 and 17
All Control Units
All Control Units
3.3 Installing Control Unit
Default setting 19: Three-wire control
with method 1
All Control Units
Selected with
STARTER: 3-wire
•
(enable/forward/backward)
BOP-2: 3-wIrE 1
•
Fieldbus interface is not active.
The CU 240B-2 does not have
terminals 16 and 17
Default setting 22: Fieldbus CANopen
Control Units CU230P-2
Selected with
STARTER: CAN fieldbus
•
BOP-2: FB CAN
•
CANopen setting: 20 kBaud
Installing
31