Siemens SINAMICS S120 Manual - Halaman 24

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SINAMICS S120. Siemens SINAMICS S120 41 halaman. Applications for cabinet modules, liquid-cooled
Juga untuk Siemens SINAMICS S120: Panduan Pengoperasian (20 halaman), Memulai (32 halaman), Deskripsi Singkat (22 halaman), Manual (43 halaman), Instruksi Untuk Pemasangan Di Kabinet Untuk Aplikasi Drive Kelautan (28 halaman), Manual Aplikasi (34 halaman), Manual Aplikasi (46 halaman), Panduan Petunjuk Pengoperasian (22 halaman), Memulai (32 halaman), Panduan Petunjuk Pengoperasian (21 halaman), Manual Teknik (30 halaman), Panduan Komisioning (20 halaman)

5 Drives Configuration

To adjust Drive Object Number order, Highlight Drive Object and then use Up and

Down arrows to move Position ("-No." field).

Figure 5-3

5.3

Set to EIP Communication

1. Open expert List for CU and Set P2030 to [10] Ethernet/IP. This works the

same for the CU310-2 PN as well.

Figure 5-4

2. Project Offline commissioning should be completed at this time. Highlight CU

and Go Online with Starter. Download offline project to Control Unit. After

Downloading and Saving Ram to ROM (this is usually default with download)

the communication for the S120 is now ready.

Power Cycle S120 and then EIP will take effect on Power Up.

Figure 5-5

SINAMICS S: Speed control of a S120 with an Allen-Bradley controller

(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP

Entry-ID: 92045369,

V4.0,

08/2018