Siemens SINAMICS S120 Manual - Page 24

Browse online or download pdf Manual for Industrial Equipment Siemens SINAMICS S120. Siemens SINAMICS S120 41 pages. Applications for cabinet modules, liquid-cooled
Also for Siemens SINAMICS S120: Operating Manual (20 pages), Getting Started (32 pages), Short Description (22 pages), Manual (43 pages), Instruction For Installation In Cabinets For Marine Drive Applications (28 pages), Applications Manual (34 pages), Applications Manual (46 pages), Operating Instructions Manual (22 pages), Getting Started (32 pages), Operating Instructions Manual (21 pages), Engineering Manual (30 pages), Commissioning Manual (20 pages)

Print Page

5 Drives Configuration

To adjust Drive Object Number order, Highlight Drive Object and then use Up and

Down arrows to move Position ("-No." field).

Figure 5-3

5.3

Set to EIP Communication

1. Open expert List for CU and Set P2030 to [10] Ethernet/IP. This works the

same for the CU310-2 PN as well.

Figure 5-4

2. Project Offline commissioning should be completed at this time. Highlight CU

and Go Online with Starter. Download offline project to Control Unit. After

Downloading and Saving Ram to ROM (this is usually default with download)

the communication for the S120 is now ready.

Power Cycle S120 and then EIP will take effect on Power Up.

Figure 5-5

SINAMICS S: Speed control of a S120 with an Allen-Bradley controller

(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP

Entry-ID: 92045369,

V4.0,

08/2018