Siemens SIPART PS2 Panduan Petunjuk Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SIPART PS2. Siemens SIPART PS2 28 halaman. Mounting bracket kit
Juga untuk Siemens SIPART PS2: Instruksi Instalasi (4 halaman), Instruksi Instalasi (4 halaman), Panduan Pemasangan Perangkat Keras (30 halaman), Deskripsi Teknis (26 halaman), Petunjuk Pengoperasian yang Ringkas (35 halaman), Petunjuk Pemasangan Kit (9 halaman), Instruksi Instalasi (11 halaman)

Halaman Cetak
Siemens SIPART PS2 Panduan Petunjuk Pengoperasian
Installing

3.2 Set of signs for the non-intrinsically safe version

3.2
Set of signs for the non-intrinsically safe version
Warning labels
Fasten the included warning label on the side across from the type plate. There are different
warning labels depending on the housing material, as described below.
Figure 3-1
Figure 3-2
Figure 3-3
3.3

Installing the mechanical limit switch module

Preparing for installation
Zone 2 and 22
It is not permissible to use the mechanical limit switch module in the zones 2 and 22.
To prepare the installation, proceed as follows:
1. Open the positioner.
2. To do this, loosen the four fixing screws of the housing cover with a Phillips screwdriver.
3. Disconnect the power supply cables or isolate them from power.
4. Remove the module cover.
5. To do this, remove the two screws with a screwdriver.
10
Warning label for a device with a plastic enclosure
Warning label for a device with an aluminum enclosure
Warning label for a device with a stainless steel enclosure
WARNING
SIPART PS2 with mechanical limit switch module
Operating Instructions (Compact), 04/2007, A5E01179056-01