Siemens SIPLUS CMS4000 IFN VIB-A Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Industri Siemens SIPLUS CMS4000 IFN VIB-A. Siemens SIPLUS CMS4000 IFN VIB-A 36 halaman. Media converter node
Juga untuk Siemens SIPLUS CMS4000 IFN VIB-A: Panduan Petunjuk Pengoperasian (39 halaman), Panduan Petunjuk Pengoperasian (27 halaman), Panduan Petunjuk Pengoperasian (32 halaman)
Halaman Cetak
Operating Instructions SIPLUS CMS4000 IFN AI-D
3.3
Mounting Angles
Characteristics
The device will be installed with mounting angles on a stable base (e.g. wall,
mounting plate).
3.3.1
Installation
Procedure
The „IFN Mounting Set" is necessary for the installation with mounting angles.
In the „IFN Mounting Set" is a drill template included in the equipment pack.
Order Number see chapter 7.1.
Procedure
Connect the mounting angles with the included screws and ring washers to the two con-
nection positions on the device (backside top and bottom).
Install the device on a stable base.
Picture 6 Connection of the mounting angels on the device (e.g. backside below)
3.3.2
Disassembling
Procedure
Dissemble all electronic connection cables.
Demount the device from the site of installation (e.g. wall).
SIPLUS CMS4000 IFN AI-D
Operating Instructions, 07/2021, A5E32612781A-AB
13