Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIPLUS CMS4000 IFN VIB-A. Siemens SIPLUS CMS4000 IFN VIB-A 36 pages. Media converter node
Also for Siemens SIPLUS CMS4000 IFN VIB-A: Operating Instructions Manual (39 pages), Operating Instructions Manual (27 pages), Operating Instructions Manual (32 pages)
Print Page
Operating Instructions SIPLUS CMS4000 IFN AI-D
3.3
Mounting Angles
Characteristics
The device will be installed with mounting angles on a stable base (e.g. wall,
mounting plate).
3.3.1
Installation
Procedure
The „IFN Mounting Set" is necessary for the installation with mounting angles.
In the „IFN Mounting Set" is a drill template included in the equipment pack.
Order Number see chapter 7.1.
Procedure
Connect the mounting angles with the included screws and ring washers to the two con-
nection positions on the device (backside top and bottom).
Install the device on a stable base.
Picture 6 Connection of the mounting angels on the device (e.g. backside below)
3.3.2
Disassembling
Procedure
Dissemble all electronic connection cables.
Demount the device from the site of installation (e.g. wall).
SIPLUS CMS4000 IFN AI-D
Operating Instructions, 07/2021, A5E32612781A-AB
13