Digital Finishing Group MC1000 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin Penjilid Digital Finishing Group MC1000. Digital Finishing Group MC1000 4 halaman. Heavy duty manual punch and manual coil binding machine
Halaman CetakDear Customer,
Thank you for purchasing MC1000 machine. The following are basic installation and
operation instruction. For advanced punching and binding, please contact DFG.
Installation
Remove the black knob from machine. Install the punch handle. Install the black knob
back to machine.
Remove the
black knob
How to Punch (EtitanCoil machine showed below)
407 1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone:248-733-0400, Fax: 775-587-5352
Email: [email protected] Website: www.dfgus.com
Install the punch handle
and black knob
1. Set the side guide to center the
sheet for punching
2. Select the punch margin (tip – the
thicker the book, the larger the punch
margin can be. However, you can use
a small punch margin for any book)
3. Make sure your sheets are all the
way inside, against the back wall, and
then move sheets to the left side
against the side guide. Pull the punch
handle to punch the sheets.