Digital Finishing Group MC1000 사용자 설명서 - 페이지 2

{카테고리_이름} Digital Finishing Group MC1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Finishing Group MC1000 4 페이지. Heavy duty manual punch and manual coil binding machine

페이지 인쇄

Dear Customer,

Thank you for purchasing MC1000 machine. The following are basic installation and

operation instruction. For advanced punching and binding, please contact DFG.

Installation

Remove the black knob from machine. Install the punch handle. Install the black knob

back to machine.

Remove the

black knob

How to Punch (EtitanCoil machine showed below)

407 1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone:248-733-0400, Fax: 775-587-5352

Email: [email protected] Website: www.dfgus.com

Install the punch handle

and black knob

1. Set the side guide to center the

sheet for punching

2. Select the punch margin (tip – the

thicker the book, the larger the punch

margin can be. However, you can use

a small punch margin for any book)

3. Make sure your sheets are all the

way inside, against the back wall, and

then move sheets to the left side

against the side guide. Pull the punch

handle to punch the sheets.