Epson 1730W - PowerLite WXGA LCD Projector Buku Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Buku Panduan Instalasi untuk Proyektor Epson 1730W - PowerLite WXGA LCD Projector. Epson 1730W - PowerLite WXGA LCD Projector 11 halaman. Esc/vp21 command business projectors
Juga untuk Epson 1730W - PowerLite WXGA LCD Projector: Daftar Bagian (1 halaman), Panduan Pengaturan Cepat (2 halaman), Pernyataan Kesesuaian (4 halaman), Spesifikasi (2 halaman), Panduan Pengguna (1 halaman), Panduan Pengguna (25 halaman), Pengaturan Cepat (2 halaman)

Halaman Cetak

Epson 1730W - PowerLite WXGA LCD Projector Buku Panduan Instalasi

Epson PowerLite 1720 / 1730W

Operating Two or More Projectors with

the Remote Control

If you're using more than one projector, you can control all the

projectors—or just selected ones—by using the projector and remote

control ID system. First assign a unique ID number to each projector.

Then set the remote control to match the ID of the projector you

want to operate. This lets you control it without affecting the others.

Setting the Projector ID

The projector's default ID is set to Off. This lets it respond to

commands from any remote control. To change the ID, follow these

steps:

1. Press the

projector's menu screen.

2. Select

3. Use the

Enter

4. When done, press

Checking the Projector ID

To check the ID of a specific projector:

1. Point the remote control at the projector you want to check.

button on the remote control. You see the

Extended > Projector ID

pointer button to highlight the new ID, and press

to select it.

to exit the menu system.

INSTALLATION HANDBOOK

Remote Control Information