Epson 1730W - PowerLite WXGA LCD Projector 설치 핸드북 - 페이지 10

{카테고리_이름} Epson 1730W - PowerLite WXGA LCD Projector에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1730W - PowerLite WXGA LCD Projector 11 페이지. Esc/vp21 command business projectors
Epson 1730W - PowerLite WXGA LCD Projector에 대해서도 마찬가지입니다: 부품 목록 (1 페이지), 빠른 설정 매뉴얼 (2 페이지), 적합성 선언 (4 페이지), 사양 (2 페이지), 사용자 설명서 (1 페이지), 사용자 설명서 (25 페이지), 빠른 설정 (2 페이지)

페이지 인쇄

Epson 1730W - PowerLite WXGA LCD Projector 설치 핸드북

Epson PowerLite 1720 / 1730W

Operating Two or More Projectors with

the Remote Control

If you're using more than one projector, you can control all the

projectors—or just selected ones—by using the projector and remote

control ID system. First assign a unique ID number to each projector.

Then set the remote control to match the ID of the projector you

want to operate. This lets you control it without affecting the others.

Setting the Projector ID

The projector's default ID is set to Off. This lets it respond to

commands from any remote control. To change the ID, follow these

steps:

1. Press the

projector's menu screen.

2. Select

3. Use the

Enter

4. When done, press

Checking the Projector ID

To check the ID of a specific projector:

1. Point the remote control at the projector you want to check.

button on the remote control. You see the

Extended > Projector ID

pointer button to highlight the new ID, and press

to select it.

to exit the menu system.

INSTALLATION HANDBOOK

Remote Control Information