Samsung 5 Series Panduan Pengguna - Halaman 3

Halaman Cetak

✎

You can adjust and store settings for each external device you have

connected to an input on the TV. Picture Sizes available by Input

Source are listed below:

Input Source

ATV, AV, Component (480i, 480p)

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

■ Digital Clean View: If the broadcast signal received by your TV is

weak, you can activate the Digital Clean View feature to reduce any

static and ghosting that may appear on the screen.

✎

When the signal is weak, try all the Digital Clean View options until

the TV displays the best picture.

■ MPEG Noise Filter: Reduces MPEG noise to provide improved

picture quality.

■ HDMI Black Level: For HDMI signals, select the black level to adjust

the screen depth. Low make blacks look darker.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode: Sets the TV to automatically sense and process ﬁlm

signals from all sources and adjusts the picture for optimum quality.

✎

Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ LED Clear Motion: Removes drag from fast scenes with a lot of

movement to provide a clear picture.

Picture Reset

Resets the picture settings to their factory defaults.

Sound Menu

Mode t

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■ Balance L/R: Adjusts the balance between the right and left speaker.

■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the loudness of speciﬁc bandwidth frequencies.

■ Reset: Resets the equalizer to its default settings.

DTS TruSurround

Available in Standard sound mode only.

DTS TruSurround is a patented DTS technology that solves the problem

of playing 5.1 multichannel content through two speakers. TruSurround

delivers a compelling, virtual surround sound experience through any

two-speaker playback system, including internal television speakers. It is

fully compatible with all multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks simultaneously (for

example, simultaneous translations of a program into foreign languages).

✎

Multi-Track Sound

Picture Size

Analog channels only.

16:9, Zoom1,

■ Mono: Select for channels that are broadcasting in mono or if you are

Zoom2, 4:3

having difﬁculty receiving a stereo signal.

■ Stereo: Select for channels that are broadcasting in stereo.

16:9, Wide Fit, 4:3,

■ SAP: Select to listen to the Separate Audio Program, which is usually

Screen Fit

a foreign-language translation.

✎

Auto Volume

Because each station has its own broadcasting conditions, the

volume may ﬂuctuate each time you change the channel. This feature

automatically adjusts the volume of a channel by lowering the sound

output when the modulation signal is high or by raising the sound output

when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed

digital audio signal when you connect the digital audio jack on the back

of the TV to a digital audio in jack on a receiver or home theater.

■ Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output format may differ depending

on the input source.

✎

■ Audio Delay: Lets you correct timing mismatches between the audio

track and the video when you are watching the TV and listening to

digital audio output from the TV through an external device such as

an AV receiver. When you select Audio Delay, a slider appears. Use

the left and right arrow buttons to adjust the slider. Press ENTERE

when done (0ms ~ 250ms).

Speaker Select

If you are listening to the sound track of a broadcast or movie through an

external receiver, you may hear a sound echo caused by the difference in

decoding speed between the TV's speakers and the speakers attached

to your audio receiver. If this occurs, set the TV to External Speaker.

✎

Visual Impaired

Digital channels only.

Adds verbal description to the main audio to help the visually impaired.

Sound Reset

Resets all sound settings to the factory

You can only select a language from among the ones being

broadcast.

Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

for 32" and above models

By connecting the TV to a receiver or home theater with Dolby

Digital and 5.1ch speakers and selecting Dolby Digital, you can

maximize your interactive 3D sound experience.

When you set Speaker Select to External Speaker, the TV's

speakers are turned off. You will hear sound through the external

speakers only. When you set Speaker Select to TV Speaker both

the TV's speakers and the external speakers are on. You will hear

sound through both.

When Speaker Select is set to External Speaker, the

and

MUTE

buttons will not operate and the sound settings will be

limited.

If there is no video signal, both the TV's speakers and the external

speakers will be mute.

VOLUME