Cisco 3600 Series Panduan Konfigurasi - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Telepon IP Cisco 3600 Series. Cisco 3600 Series 36 halaman. Memory upgrade
Juga untuk Cisco 3600 Series: Ikhtisar Produk (10 halaman), Petunjuk Peningkatan (30 halaman), Panduan Pemilik (17 halaman), Catatan Aplikasi (41 halaman), Panduan Pengguna (25 halaman), Lampiran (15 halaman), Panduan Pengguna (7 halaman), Manual (5 halaman), Catatan Konfigurasi (23 halaman), Catatan Konfigurasi (18 halaman), Catatan Konfigurasi (25 halaman)

Halaman Cetak

R12-e establish the WAN connection between the two offices. Because one POTS telephony device

is connected to Router RLB-2, it has also been configured for only one POTS peer and one VoIP

peer.

Note

the topology of this FXS-to-FXS connection example.

Figure 12

Dial peer 1

POTS

Configuration for Router RLB-1

In this example, only the calling end (Router RLB-1) is request RSVP. Figure 12 illustrates

FXS-to-FXS Connection Example

64 kbps

Voice port

Serial port

1/0/0

0/0

Router

RLB-1

hostname rlb-1

! Create voip dial peer 10

dial-peer voice 10 voip

! Define its associated telephone number and IP address

destination-pattern +4155554000

session target ipv4:40.0.0.1

! Request RSVP

req-qos guaranteed-delay

! Create pots dial peer 1

dial-peer voice 1 pots

! Define its associated telephone number and voice port

destination-pattern +4085554000

port 1/0/0

! Configure serial interface 0/0

interface Serial0/0

ip address 10.0.0.1 255.0.0.0

no ip mroute-cache

! Configure RTP header compression

ip rtp header-compression

ip rtp compression-connections 25

! Enable RSVP on this interface

ip rsvp bandwidth 48 48

fair-queue 64 256 36

Serial port

IP cloud

1/0

1/3

Router

128 kbps

RLB-w

Configuring Voice over IP for the Cisco 3600 Series VC-39

FXS-to-FXS Connection Using RSVP

Serial port

1/3

1/0

Router

64 kbps

R12-e

Serial port

1/0

Router

RLB-2

Voice port

1/0/0

Dial peer 2

POTS