Cisco 3600 Series Configuratiehandleiding - Pagina 27

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 3600 Series. Cisco 3600 Series 36 pagina's. Memory upgrade
Ook voor Cisco 3600 Series: Productoverzicht (10 pagina's), Upgrade-instructies (30 pagina's), Gebruikershandleiding (17 pagina's), Toepassingsnotitie (41 pagina's), Gebruikershandleiding (25 pagina's), Bijlage (15 pagina's), Gebruikershandleiding (7 pagina's), Handmatig (5 pagina's), Configuratie Opmerking (23 pagina's), Configuratie Opmerking (18 pagina's), Configuratie Opmerking (25 pagina's)

Pagina afdrukken
Cisco 3600 Series Configuratiehandleiding
R12-e establish the WAN connection between the two offices. Because one POTS telephony device
is connected to Router RLB-2, it has also been configured for only one POTS peer and one VoIP
peer.
Note
the topology of this FXS-to-FXS connection example.
Figure 12
Dial peer 1
POTS
Configuration for Router RLB-1
In this example, only the calling end (Router RLB-1) is request RSVP. Figure 12 illustrates
FXS-to-FXS Connection Example
64 kbps
Voice port
Serial port
1/0/0
0/0
Router
RLB-1
hostname rlb-1
! Create voip dial peer 10
dial-peer voice 10 voip
! Define its associated telephone number and IP address
destination-pattern +4155554000
session target ipv4:40.0.0.1
! Request RSVP
req-qos guaranteed-delay
! Create pots dial peer 1
dial-peer voice 1 pots
! Define its associated telephone number and voice port
destination-pattern +4085554000
port 1/0/0
! Configure serial interface 0/0
interface Serial0/0
ip address 10.0.0.1 255.0.0.0
no ip mroute-cache
! Configure RTP header compression
ip rtp header-compression
ip rtp compression-connections 25
! Enable RSVP on this interface
ip rsvp bandwidth 48 48
fair-queue 64 256 36
Serial port
IP cloud
1/0
1/3
Router
128 kbps
RLB-w
Configuring Voice over IP for the Cisco 3600 Series VC-39
FXS-to-FXS Connection Using RSVP
Serial port
1/3
1/0
Router
64 kbps
R12-e
Serial port
1/0
Router
RLB-2
Voice port
1/0/0
Dial peer 2
POTS