Cisco 6961 - Unified IP Phone Standard VoIP Fitur - Halaman 26

Jelajahi secara online atau unduh pdf Fitur untuk Telepon IP Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 29 halaman. Unified communications manager express
Juga untuk Cisco 6961 - Unified IP Phone Standard VoIP: Lembar data (5 halaman), Catatan Rilis (18 halaman), Lembar data (5 halaman), Panduan Pengguna (38 halaman), Panduan Administrasi (14 halaman), Setup Manual (16 halaman), Panduan Referensi (4 halaman), Panduan Administrasi (19 halaman), Panduan Untuk Menggunakan (6 halaman), Kartu Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman)

Cisco 6961 - Unified IP Phone Standard VoIP Fitur

Adjust Handset Rest

Adjust Handset Rest
If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.
Power-Saving Mode
Your phone supports the Cisco EnergyWise (EW) program. Your system administrator sets up sleep (power
down) and wake (power up) times for your phone to save energy.
Ten minutes before the scheduled sleep time, the Select button flashes and you receive a message that your
phone will power down at a specific time. If the power-saving mode is enabled by your system administrator,
you hear your ringtone play. The ringtone plays according to the following schedule:
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0
(SCCP and SIP)
26
Features of Your Cisco Unified IP Phone