Cisco 6961 - Unified IP Phone Standard VoIP Panduan Administrasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Administrasi untuk Telepon IP Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 19 halaman. Unified communications manager express
Juga untuk Cisco 6961 - Unified IP Phone Standard VoIP: Lembar data (5 halaman), Catatan Rilis (18 halaman), Lembar data (5 halaman), Panduan Pengguna (38 halaman), Panduan Administrasi (14 halaman), Setup Manual (16 halaman), Fitur (29 halaman), Panduan Referensi (4 halaman), Panduan Untuk Menggunakan (6 halaman), Kartu Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman)

Halaman Cetak
Cisco 6961 - Unified IP Phone Standard VoIP Panduan Administrasi
Cisco Unified IP Phone Settings
To exit the Trust List menu, press Back.
Table 5: Trust List menu settings
Option
CTL File
ITL File
Configuration (signed)

802.1X Authentication and Status

The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X authentication
and view transaction status. These options are described in the following table.
To exit these menus, press Exit.
Table 6: 802.1X Authentication Settings
Option
Device Authentication
Description
Determines whether 802.1X
authentication is enabled:
• Enabled: Phone uses 802.1X
authentication to request network
access.
• Disabled: Default setting in
which the phone uses CDP to
acquire VLAN and network
access.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager
Description
Displays the MD5 hash of the CTL
file.
Displays a submenu of options.
Select an option to view its ITL
setting information:
• ITL Signature: MD5 hash of
the ITL file
• Unified CM/TFTP Server
• CAPF Server
• TVS
Displays the SRST router.
802.1X Authentication and Status
To change
For more information about this
file, see "Configuring the Cisco
CTL Client" chapter in the Cisco
Unified Communications Manager
Security Guide.
For more information about this
file, see "Configuring the Cisco
ITL Client" chapter in the Cisco
Unified Communications Manager
Security Guide.
To Change
Set Device Authentication Field, on page
16
10.0 (SCCP and SIP)
15