Siemens XT55 GPS Startup Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol Siemens XT55 GPS Startup. Siemens XT55 GPS Startup 13 halaman.
Halaman CetakXT55 GPS Startup User's Guide
Confidential/Released
•
Click the Connection/Disconnection icon on the toolbar by the up-down button (see
Figure 5), the program will then automatically connect to Data Source and starts
evaluating.
Click this button to
open and close the
connection.
•
The output messages can be viewed in the Development Data screen. For a description
of NMEA messages refer to [3]. The valid/invalid protocols can be recognized on the
$GPRMC protocol as shown in figure below. The capital letter "A" means, incoming
protocols are valid while the capital letter "V" means incoming protocols are invalid.
XT55_GPS_startup_ug_V02a
Figure 5: SiRFstar demo on selected COM port
Figure 6: Development data screen
Page 10 of 13
s
m
o b i l e
28.06.2004