Siemens XT55 GPS Startup User Manual - Page 10

Browse online or download pdf User Manual for Control Unit Siemens XT55 GPS Startup. Siemens XT55 GPS Startup 13 pages.

Print Page
XT55 GPS Startup User's Guide
Confidential/Released
•
Click the Connection/Disconnection icon on the toolbar by the up-down button (see
Figure 5), the program will then automatically connect to Data Source and starts
evaluating.
Click this button to
open and close the
connection.
•
The output messages can be viewed in the Development Data screen. For a description
of NMEA messages refer to [3]. The valid/invalid protocols can be recognized on the
$GPRMC protocol as shown in figure below. The capital letter "A" means, incoming
protocols are valid while the capital letter "V" means incoming protocols are invalid.
XT55_GPS_startup_ug_V02a

Figure 5: SiRFstar demo on selected COM port

Figure 6: Development data screen

Page 10 of 13
s
m
o b i l e
28.06.2004