Epson 835p - PowerLite XGA LCD Projector Pengaturan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Proyektor Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 4 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 835p - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Buletin Dukungan Produk (30 halaman), Panduan Tambahan (1 halaman), Brosur & Spesifikasi (4 halaman), Informasi Produk (21 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Manual Fungsi (5 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Lembar Spesifikasi (4 halaman)

Halaman Cetak

Epson 835p - PowerLite XGA LCD Projector Pengaturan Cepat

If you see a blank screen or you don't see the image you are trying

to project from your computer, make sure the Power light on the

projector is green and not flashing, and the lens cover is off. If the

screen is still blank, restart your notebook, or press the Search button

on the remote control again. If mute mode is active, press the

A/ V Mute button on the remote control.

Windows

Hold down the Fn button on the keyboard and press the

function key that lets you display on an external monitor. It may have

an icon such as

If your projector and notebook don't display the same image, do

the following:

Windows:

Try using the CRT/LCD or

above. If this doesn't work, double-click Display in the Control Panel.

Make sure both the LCD screen and monitor port are enabled. (Allow

a few seconds for the projector to sync up.) See your Windows online

help for details.

Macintosh

then click Displays. Select the VGA Display or Color LCD dialog box,

click the Arrangement (or Arrange) tab, and make sure Mirror

Displays is checked.

Click here

Make sure this

is checked

Macintosh OS 9 or earlier:

Panels, then click Monitors or Monitors and Sound. Click the

Arrange icon, then drag one monitor icon on top of the other; this

lets you display on both the projection screen and the LCD screen.

If this option isn't available, click the Monitor icon and select a

Simulscan resolution.

Click here

If you see an image but it's not displayed correctly, press the Auto

button on the remote control to automatically readjust it.

If projecting wirelessly...

Follow the steps in this section to project over an 802.11g or 802.11b

wireless network from a computer running Windows 98, 2000, Me, XP, or

Macintosh OS X 10.2.4 or above.

NOTE:

You must have already installed the projector's EasyMP (EMP NS

Connection) software and configured your projector and computer. See

the User's Guide for instructions. Also, your computer must have an

802.11g or 802.11b network card or transmitter installed.

Make sure you've turned on the

projector and adjusted the image

as described in sections 1 and 2 on

the front of this sheet.

Select EasyMP as the source by

pressing the EasyMP button on

the remote control.

Insert the Epson 802.11g card with the label facing upward, as shown.

When fully inserted, the end of the card will protrude.

NOTE:

Use only the Epson 802.11g card. Other brands may not be

compatible and are not guaranteed to work.

, or it may be labeled CRT/LCD.

OS X:

From the Apple menu, select System Preferences,

From the Apple menu, select Control

function key, as described

Drag one monitor

icon onto the other