Cisco 7905 Panduan Telepon - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Telepon untuk Telepon IP Cisco 7905. Cisco 7905 46 halaman. Ip talk series
Juga untuk Cisco 7905: Panduan Pengguna (19 halaman), Panduan Pengguna (10 halaman), Panduan Referensi Cepat (7 halaman), Panduan Referensi (20 halaman), Panduan Pengguna (8 halaman), Panduan Referensi Cepat (7 halaman)

Customizing Phone Settings

You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below.

Note

• Most settings are accessible on your phone, but a few are accessed online from your

User Options web pages. See the "Accessing Your User Options Web Pages" section on

page 28 for more information.

• If you want to restore your previously-saved settings on the phone, choose Settings > more

> Restore.

• If you want to restore these settings back to those originally stored on the phone when it

was manufactured, choose Settings > more > Factory. All your previously saved changes

will be reset.

The table below describes how to adjust and save volume levels on your phone.

If you want to...

Adjust the volume

level for a call

Adjust the volume

level for the ringer

If you adjust the handset or speaker volume without saving the change, the volume will revert

Tip

to the previously saved level the next time you use that audio mode.

Cisco IP Phone 7905G and 7912G for Cisco CallManager

Then...

Press the volume button during a call or after invoking a dial tone.

Doing so adjusts the volume level for the currently active audio mode. For

example, if you increase the volume while you are using the handset, you

have not affected the speaker volume.

Press Save to preserve the new volume as the default level for this audio

mode. If you want your phone to keep this volume setting even after a reboot,

press the Menu button and choose Settings > Save.

Press the volume button while the handset is in the cradle. The new ringer

volume is saved automatically.

Customizing Phone Settings