Customizing Phone Settings
You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below.
Note
• Most settings are accessible on your phone, but a few are accessed online from your
User Options web pages. See the "Accessing Your User Options Web Pages" section on
page 28 for more information.
• If you want to restore your previously-saved settings on the phone, choose Settings > more
> Restore.
• If you want to restore these settings back to those originally stored on the phone when it
was manufactured, choose Settings > more > Factory. All your previously saved changes
will be reset.
Adjusting the Volume
The table below describes how to adjust and save volume levels on your phone.
If you want to...
Adjust the volume
level for a call
Adjust the volume
level for the ringer
If you adjust the handset or speaker volume without saving the change, the volume will revert
Tip
to the previously saved level the next time you use that audio mode.
Cisco IP Phone 7905G and 7912G for Cisco CallManager
Then...
Press the volume button during a call or after invoking a dial tone.
Doing so adjusts the volume level for the currently active audio mode. For
example, if you increase the volume while you are using the handset, you
have not affected the speaker volume.
Press Save to preserve the new volume as the default level for this audio
mode. If you want your phone to keep this volume setting even after a reboot,
press the Menu button and choose Settings > Save.
Press the volume button while the handset is in the cradle. The new ringer
volume is saved automatically.
Customizing Phone Settings
25