Epson 835p - PowerLite XGA LCD Projector Buletin Dukungan Produk - Halaman 30

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Proyektor Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 30 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 835p - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Pengaturan Cepat (4 halaman), Panduan Pengoperasian (47 halaman), Panduan Tambahan (1 halaman), Brosur & Spesifikasi (4 halaman), Informasi Produk (21 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Ringkasan Teknis (7 halaman), Manual Fungsi (5 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Lembar Spesifikasi (4 halaman)

Epson 835p - PowerLite XGA LCD Projector Buletin Dukungan Produk
EPSON
Date:
07/16/2003
PSB.2003.07.001
PSB #:
N/A
Reference:
Product(s):
PowerLite – 735c / 7850p / 8300i (with Easy-MP.Net option installed)
Epson Wireless Projectors and using dual mode 802.11b/g or 802.11b/a
Subject:
wireless PC Cards
This bulletin was created to inform you of issues that have been reported when accessing Epson
Wireless Projectors using dual mode 802.11b/g or 802.11b/a wireless PC Cards, either in ad-hoc
mode or through dual mode Access Points.
Reason:
The dual mode PC Cards and Access Points tend to have interference and compatibility
problems when operating in dual mode.
Solution:
For optimal performance results with Epson 802.11b wireless products, it is recommended that
single/native 802.11b mode be used.
If your dual mode wireless PC Card and/or Access Point can be configured to support the
802.11"b" mode only, set it to 802.11"b" only.
Note: In some cases it is not enough to disable dual mode and set the mode to 802.11"b" only;
on some dual mode PC cards (802.11b/g or 802.11b/a) the "A" and "G" modes cannot be turned
off.
P
S
RODUCT
UPPORT
B
ULLETIN
Page 1 of 1
Originator: TC
Authorization:
Total Pages: 1