Siemens WM10A166GC Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Mesin cuci Siemens WM10A166GC. Siemens WM10A166GC 8 halaman.

Halaman Cetak
Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute thick fabric softener and fabric conditioner with water.
This prevents blockages.
Setting and adjusting programmes
Additional function
page 5.
page 9.
page 7.
page 6.
Measure accordingly:
1
Individual settings,
2
Select Start

Washing

Detergent drawer with
compartments II,
Drum
Control panel
Washing machine
door
Service flap for
detergent solution
pump
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If
(no spin, without final spin) is active: Turn the
programme selector to Udpumpning (Empty) or select
the spin speed.
Select Start
.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for AquaStop models
Installation Instructions, page 7.
Switching off
Turn the programme selector to Fra (Off).
End of programme when ...
... the status indicator
(spin) -
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select Skyl (Rinse).
3
– Select Start
.
Programmes at lower temperatures:
– Select Centrifugering (Spin) or Udpumpning (Empty).
– Select Start
.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select Start
. The new programme starts from the
beginning.
Hinweise
(end) flashes.
4