Siemens WU P Series Buku Petunjuk dan Petunjuk Instalasi - Halaman 28
Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Siemens WU P Series. Siemens WU P Series 40 halaman.
Halaman Cetak
Operating the appliance
en
Cancel the programme
For programmes at high temperatures:
Touch the A Start/Reload button.
1.
To cool down laundry: Select Rinse.
2.
Touch the A Start/Reload button.
3.
For programmes at low temperatures:
Touch the A Start/Reload button.
1.
Select Spin.
2.
Touch the A Start/Reload button.
3.
Programme end during rinse
hold
If you set spin speed to- - - (- - - = no
drain), the symbol 0 - - - and Õ appear
in the display panel and the A symbol
flashes.
Continue the program by:
Touching the A Start/Reload
■
button (the laundry will be drained
with the default spin speed setting)
or
Selecting a spin speed or set the
■
program selector to Spin and then
touching the A Start/Reload
button.
Programme end
End appears in the display panel and
the symbol Õ and A disappear.
If you set spin speed to 0 (0= "No
spin"). The water is only drained.
28
After washing
Set programme selector to $ Off.
1.
Open appliance door and remove
2.
laundry.
Not required for Aqua-Stop
Note:
models.
Turn off the tap.
3.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.