Siemens WU P Series Buku Petunjuk dan Petunjuk Instalasi - Halaman 29
Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Siemens WU P Series. Siemens WU P Series 40 halaman.
Halaman Cetak
Q
Appliance settings
Y ou can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the end signal.
■
The volume of the button signal.
■
Switching the drum care information
■
signal on/off.
You will need to activate the setting
mode in order to change these settings.
1/2/3/4...
positions on the
programme selector
Activate setting mode:
Set the programme selector to
1.
position 1. The appliance is switched
on.
Touch and hold the A Start/Reload
2.
button and, at the same time, turn
the programme selector clockwise to
position 2/3/4. Release the A
Start/Reload button.
The setting mode is activated and the
preset setting appears in the display
panel.
Appliance settings
Changing the volume and drum care
information
Use the Finish in û button to change
the following settings at the
corresponding programme selector
positions:
2: The volume of the end signal.
■
3: The volume of the button signals.
■
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
3: Switching the drum care
■
information signal on/off.
on
Ž
Πoff
Exiting setting mode
You can now end the process and set
the programme selector to the $ Off
position. The settings are saved.
en
29