ACD DS210 Series Dokumentasi Perangkat Keras - Halaman 11

Jelajahi secara online atau unduh pdf Dokumentasi Perangkat Keras untuk Perangkat genggam ACD DS210 Series. ACD DS210 Series 20 halaman.
Juga untuk ACD DS210 Series: Tinjauan Singkat (15 halaman)

5.2 Hardware configuration ACD DS210 Ethernet

The ACD DS210 Ethernet is suitable for charging the M210, for charging a replacement battery, for data
transfer via USB interface to a PC and for connection of a USB end device e.g. a USB memory stick.
Furthermore it is possible to connect the DS210 to the LAN (Ethernet) with a network cable. Therfore plug
the network cable in the RJ45 connector with the LED at the back of the DS210.
Connect. power
supply pack
Pic. 7: Back ACD DS210 Ethernet
Connections from left to right:
Connection power supply pack.
The RJ45 connector with the LED is the Ethernet interface.
The USB-B connector is occupied according to USB standard. Usual USB A-B cables can be connected.
The USB-A connector is also occupied according to USB standard. According to the application usual
USB A-B, USB A-miniB cable, USB A-male – A-female extension cable or a USB stick can be
connected.
DS210_HardwareDocu_V1.50_EN.doc
LAN RJ45
USB-B
USB-A
11 / 20