ACD DS210 Series 하드웨어 문서 - 페이지 11
{카테고리_이름} ACD DS210 Series에 대한 하드웨어 문서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD DS210 Series 20 페이지.
ACD DS210 Series에 대해서도 마찬가지입니다: 간략한 개요 (15 페이지)
페이지 인쇄5.2 Hardware configuration ACD DS210 Ethernet
The ACD DS210 Ethernet is suitable for charging the M210, for charging a replacement battery, for data
transfer via USB interface to a PC and for connection of a USB end device e.g. a USB memory stick.
Furthermore it is possible to connect the DS210 to the LAN (Ethernet) with a network cable. Therfore plug
the network cable in the RJ45 connector with the LED at the back of the DS210.
Connect. power
supply pack
Pic. 7: Back ACD DS210 Ethernet
Connections from left to right:
•
Connection power supply pack.
•
The RJ45 connector with the LED is the Ethernet interface.
•
The USB-B connector is occupied according to USB standard. Usual USB A-B cables can be connected.
•
The USB-A connector is also occupied according to USB standard. According to the application usual
USB A-B, USB A-miniB cable, USB A-male – A-female extension cable or a USB stick can be
connected.
DS210_HardwareDocu_V1.50_EN.doc
LAN RJ45
USB-B
USB-A
11 / 20