Siemens SIMATIC S7-1200 Manual - Halaman 27

Jelajahi secara online atau unduh pdf Manual untuk Beralih Siemens SIMATIC S7-1200. Siemens SIMATIC S7-1200 49 halaman. Controlling several fans (ebm-papst) via modbus rtu
Juga untuk Siemens SIMATIC S7-1200: Manual (30 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Manual Pemrograman Keselamatan (48 halaman), Manual (40 halaman), Manual (17 halaman), Manual (31 halaman), Manual (20 halaman)

Halaman Cetak
Siemens SIMATIC S7-1200 Manual
4 Installation and Commissioning
4.2

Network connections

To configure the controller and the HMI, the LAN network card of the programming
unit needs a static IP address.
The configuration of the LAN connection is described in the following.
Table 4-2
No.
Click "Start > Control Panel > Network and
1.
Sharing Center > Change adapter settings"
to open the network connections.
Select your network connection.
Right-click to open the properties.
Select the "Internet Protocol Version 4
2.
(TCP/IPv4)" element in "Networking" and
open its properties.
Controlling several fans (ebm-papst) via Modbus RTU
Entry ID: 109476801,
V2.0,
Action
09/2018
Remark
27