Siemens SIMATIC S7-1200 Manual - Halaman 28

Jelajahi secara online atau unduh pdf Manual untuk Beralih Siemens SIMATIC S7-1200. Siemens SIMATIC S7-1200 49 halaman. Controlling several fans (ebm-papst) via modbus rtu
Juga untuk Siemens SIMATIC S7-1200: Manual (30 halaman), Panduan Petunjuk Pengoperasian (36 halaman), Manual Pemrograman Keselamatan (48 halaman), Manual (40 halaman), Manual (17 halaman), Manual (31 halaman), Manual (20 halaman)

Halaman Cetak

4 Installation and Commissioning

No.



Choose "Use the following IP address".



Select an IP address in the CPU's

subnet mask.



Confirm the settings with "OK" and

"Close".

4.2.1

Setting the PG/PC interface

Table 4-3

No.

Open the PG/PC interface settings via

"Start > Control Panel" to set the correct

access path for STEP 7 V15.



Select "S7ONLINE (STEP 7)" as the

application's access point.



Select your network card with

"(Parameter assignment of your NDIS

CP with TCP/IP protocol (RFC-1006))"

as the interface configuration used.

Confirm the settings with "OK".

Controlling several fans (ebm-papst) via Modbus RTU

Entry ID: 109476801,

V2.0,

Action

09/2018

Remark

Remarks