Siemens Sitrans WM100 Panduan Petunjuk Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Siemens Sitrans WM100. Siemens Sitrans WM100 16 halaman. Motion sensing switch
Juga untuk Siemens Sitrans WM100: Panduan Petunjuk Pengoperasian (22 halaman)
Halaman Cetak
Specifications
Power
• 115 V AC, 50/60 Hz, 7 VA
or
• 230 V AC, 50/60 Hz, 7 VA
"
•
10% of rated voltage
Output
•
1 form C (SPDT) dry relay contacts, rated 5 A at 250 V AC non-inductive, fail-safe
operation
•
time delay :
•
•
•
Operating Temperature
• – 40 to +60 °C (– 40 to +140 °F)
Environmental
• location: indoor/outdoor
• altitude: 2000 m (6562 ft.) max.
• ambient temperature: -40 to +60 °C (-40 to +140 °F)
• relative humidity: suitable for outdoor (Type 4 / NEMA 4, Type 4X / NEMA 4X, Type 6 /
NEMA 6, IP67)
• installation category: II
• pollution degree: 4
Dynamic Range
• minimum 6 or 12 pulses per minute
• maximum 3000 pulses per minute
Shipping Weight
• 2 kg (4.4 lbs)
Approvals
• CSA
, CE, C-TICK
US/C
1.
Selected via a common jumper. Refer to Operation.
7ML19985MW01
start up : 10 to 14 seconds (or 5 to 7 seconds with 5 sec/12 PPM
jumper installed)
zero speed : 5 seconds
"
seconds
2 (minimum speed 5 to 7.5 ppm)
LED indicates detection of changes in magnetic field (resets zero speed
timer)
SITRANS WM100 – OPERATING INSTRUCTIONS
"
1 (minimum speed 10 to 15 ppm)
1
1
or 10
1
Page 3